Vertuo Next

Modern, appealing and superb experience

User guide for the Vertuo next. 

User manual for cleaning and descaling Vertuo Next.

User guide for Vertuo POP.

User guide for Vertuo Plus.

Video can be seen here.

 

Features: 

  • Espresso, double espresso, gran lungo, mug & carafe
  • 25 sec. rapid heating
  • Automatic power off
  • 14,2x42,9x31,4 cm (wxdxh)
  • 54% recycled plastic
  • 6 cup sizes
  • 1 ltr. watertank

  • Check the mains, plug, voltage, and fuse. 
  • If the problem persists, please call our phone or send us an email 

  • First use: fill water tank with warm water (max. 55° C) and run through machine.
  • Water tank is empty. Fill water tank.
  • Descale if necessary; see Descaling section.

  • Flow speed depends on the coffee variety.
  • Descale if necessary; see Descaling section.

  • Preheat cup.
  • Descale if necessary.

  • Position capsule correctly. If leakages occur, call Nespresso.

  • In case of problems, call Nespresso.

  • To save energy the machine will turn off after 2 minutes of non-use.

  • Perform cleaning procedure twice.

  • Fill the water tank and push button to start.
  • Check that handle is properly locked.

  • If coffee is flowing normally, this indicates the machine is working properly.
  • If only water is flowing, the machine is executing a user request for either cleaning, descaling or emptying the system.
  • If there is no intention to clean, descale, or empty the system, then push the button to stop the machine. If the machine is still blinking, exit descaling mode by holding the button for at least 7 seconds. If problem persists, call Nespresso.

  • It will take some time before the coffee flow comes out (due to barcode reading and pre- wetting the coffee).
  • Check that a fresh capsule is inserted in correct position, that the handle is properly locked and push the button to start.
  • Fill the water tank and push button to start.
  • Turn the machine to “OFF mode” by pushing the button for 3 seconds and then push it again to turn the machine “ON”. Now wait approximately 20 minutes to allow the machine to cool down after extensive use.
  • If the machine doesn’t turn “OFF” then exit descaling mode by pushing the button for at least 7 seconds.

  • Check if the water tank does not have any damage and is securely positioned in the machine before brewing. If this does not resolve the issue, please contact our number.