Creatista Pro
Exquisite machine from Nespresso. Powerful & pretty.
- Check the mains, plug, voltage, and fuse.
- If the problem persists, please call our phone or send us an email
- First use: fill water tank with warm water (max. 55° C) and run through machine.
- Water tank is empty. Fill water tank.
- Descale if necessary; see Descaling section.
- Flow speed depends on the coffee variety.
- Descale if necessary; see Descaling section.
- Preheat cup.
- Descale if necessary.
- Position capsule correctly. If leakages occur, call Nespresso.
- In case of problems, call Nespresso.
- Please contact Nespresso via phone or email
- Check if the water tank is correctly positioned, if empty, fill with fresh potable water.
- Check steam tip for any blockages and ensure wand is lowered.
- Use fresh, potable water. Do not use highly filtered, demineralised or distilled water.
- Machine turns OFF automatically.
- Press POWER button to turn machine ON.
- Check the outlet: plug, voltage, fuse.
- Screen brightness is set on a low setting.
- Press POWER button to turn ON.
- Adjust the screen brightness setting. Navigate to Menu and select Screen Brightness.
- Check if the water tank is correctly positioned.
- If problem persists, call Nespresso
- Press POWER button to turn machine OFF. Press POWER button again to turn machine ON.
- If problem persists, call Nespresso
- Clean the steam wand.
- Navigate to the Menu and select Clean Steam Wand. Follow the on-screen prompts.