
Vertuo Plus
Powerful and versatile
User manual for the machine.
User manual for cleaning and descaling.
Video can be seen here.
Features:
- Ristretto, espresso, double espresso, gran lungo, mug, carafe
- 25 sek. to heat
- Automatic power off after 9 mins.
- 23,2x42,34x32,5 cm (bxdxh)
- 1300 W
- 1,7 litre removable water tank
- Check the machine head is properly closed.
- If you want to brew an Alto, Coffee or Espresso, check that a fresh capsule is inserted in correct position, that the machine head is properly closed and push the button to start.
- The machine is heating up and it will take maximum one minute to be ready.
- This indicates the machine is working properly.
- Descaling needed: Machine can be operated when alert appears only a few times after this alert before descaling becomes necessary.
- Remove any obstacle, empty the capsule container if necessary, and then open or close the machine head depending on position.
- Fill the water tank and push button to start.
- Open the machine head to eject capsule.
- Check that a fresh capsule is inserted in correct position, that the machine head is closed and push the button to start.
- Press the lever up and wait until the machine head stops, release any obstacle if applicable, empty the capsule container if necessary, and then press the lever down to close the machine head.
- Turn the machine OFF, unplug the power cord, wait for 15 minutes for the machine to cool down.
- Plug the power cord and turn the machine ON by pressing the lever down. Machine is heating up and will go to steady GREEN when ready
- If problem persists, call Nespresso
- Machine is cooling down and will go to steady green when ready.
- Special function running; open the machine head and let the capsule be ejected. Then restart the function by pressing the button.
- If in the "Emptying the system" mode, remove the water tank.
- Special Functions menu: Choose desired special function by pressing lever down.
- Special function is running.
- Refer to applicable section; Descaling/ Cleaning/ Emptying the system/ Reset to factory settings.
- Special function is in selection mode. Refer to applicable paragraph; Descaling/ Cleaning/ Emptying the system/ Reset to factory settings.
- Check that the light on the button is GREEN.
- Check that the water tank is filled and is well positioned.
- Check that a fresh capsule is inserted in correct position, that the machine head is closed and push the button to start.
- Descale if necessary.
- Open the machine head and let the capsule be ejected. Then perform a cleaning as per cleaning section.
- Preheat cup with hot drinking water from the tap.
- Descale if necessary.
- Open the machine head. Remove the power cord from the grid. Clean the metallic clamps with precaution. Be careful of the sharp edges in the machine head.
- If problem persists, call Nespresso
- Start the cleaning procedure.
- To save energy the machine will turn off after 9 minutes of non-use.
- See paragraph on "Energy Saving Concept".